The JBL Bluetooth Speaker is a great device for any home or office, but it can be hard to know how to keep this device clean. Most of the time cleaning your speaker means wiping it down with a microfiber cloth, but what about those hard-to-reach spots? Here are some tips for how to clean your JBL Bluetooth Speaker that will help you maintain its pristine condition.
Why and how to clean a JBL Bluetooth Speaker? Your JBL Bluetooth Speakers are made of a variety of materials, and each has its own care needs. Some surfaces can be cleaned with a simple wipe down with a microfiber cloth, alcohol-based cleaners, waterless cleaner, but others may require the use of a damp cloth or even water with a cotton swab.
If your speaker’s been outdoors or in an extremely humid environment, it might need to dry out before you can start cleaning it.
In this article, we’ll cover the different materials used for constructing JBL Bluetooth speakers and teach you how to keep them looking great — because your music deserves better than dirty speakers.
What Can I clean my JBL Bluetooth speaker with?
Microfiber Cloth
The JBL Bluetooth Speaker is a device with a lot of moving parts, so it can be tough to clean.
One convenient way to clean your speaker is by using a microfiber cloth. When you use the cloth to wipe down your speaker, make sure you get into all the cracks and holes.
A common mistake people make when cleaning their speakers is that they forget about the base of the speaker and just wipe it on top of it.
Instead, dip a dry microfiber cloth in warm water with a teaspoon of liquid dish detergent and a teaspoon of ammonia.
Lightly blot the stain and let it sit for 15 minutes then lightly blot again. Do not rub it, as rubbing may cause more damage than good. Let it dry before trying it again.
Cotton Swab Method
Use a cotton swab and dip it in warm water with a teaspoon of liquid dish detergent and a teaspoon of ammonia. Lightly blot the stain, let it sit for 15 minutes then blot again. Do not rub it. Let it dry before trying it again.
If food is still present, use your cotton swab to make small circles on the area that needs more attention with soapy water or a diluted food-based cleaner. Make sure to use clean hands when applying these types of cleaners!
Alcohol and Cleaning
If you have a wine or champagne stain, apply a small amount of alcohol to the stain and rub it with your clean hand.
Let it sit for 10 minutes then blot with a cloth. If the stain is still present, repeat again until it is gone. Use a dry cloth to remove any remaining moisture from the speaker.
For food-based stains, use a clean white cloth and dip it in a cup of warm water with soap and detergent mixed in.
Lightly blot the stain and let it sit for 15 minutes then lightly blot again. Do not rub or use hard pressure on the speaker while this is happening.
Waterless Cleaner
If you’re in need of a water-free cleaning option, try using a small amount of baking soda and vinegar paste. Apply this paste to the item and let it sit for about five minutes. Then use a cloth or sponge with warm water to remove the paste.
If your speaker is covered in dirt, dust, or other debris, use a gentle dish soap and water mixture to clean it off and rinse thoroughly before drying.
For stubborn stains, you might want to try soaking your speaker in rubbing alcohol overnight before trying any of the above methods.
Related: How to Connect JBL GO Bluetooth Speaker to Laptop Windows 7
Clean the JBL Bluetooth Speaker From the Outside
It is important to clean the speaker from the outside off the device first. When you hold your speaker in one hand, with the other hand, spray it with a cleaner like Windex or Lysol and wipe it off. Do this on both sides of your speaker.
If there are any fingerprints or smudges on your Bluetooth Speaker, use a microfiber cloth to wipe them away. Then use a dry cloth to remove any residue that might be left behind.
To clean the outside of your JBL Bluetooth Speaker, use a paper towel and dip it in some water with a teaspoon of liquid dish detergent and a teaspoon of ammonia.
Lightly blot the stain, let it sit for 15 minutes then lightly blot again. Do not rub it. Let it dry before trying it again.
Clean the JBL Bluetooth Speaker From the Inside Out
Cleaning your JBL Bluetooth Speaker from the inside out is a good idea for a few reasons. The first reason is that only the speaker’s exterior can easily be cleaned. While it is possible to wipe down the inside of the speaker, you may not have access to every part of the device without opening it up.
The second reason to clean from the inside out is that any cleaning residue left on an internal component could cause future problems with your device’s sound quality. Internal components can also be sensitive to moisture and cleaning chemicals, so any residue from those ingredients could cause problems.
If you want your speaker to last as long as possible, then taking a few moments each week or month to clean it will help maintain its pristine condition.
How to clean the JBL Bluetooth speaker from the inside out
The most important part of cleaning your JBL Bluetooth Speaker is keeping it clean from the inside out.
The first thing to do is to make sure it’s unplugged from the power source. Remove the battery from the device and unfold the flap that covers the USB port. Cleaning up after a spill is easier when you don’t have a bunch of electronics around plugged in. It also helps to remove any water or fluids that may be in your speaker!
Next, take a cloth or paper towel and cover it with rubbing alcohol. Follow that by dipping it into some warm water with a teaspoon of liquid dish detergent and a teaspoon of ammonia. Lightly blot the stain and let it sit for 15 minutes then lightly blot again. Do not rub it. Let dry before trying it again!
Cleaning the Controls and Buttons
If you’re looking for a way to clean your speaker’s controls and buttons, try using a cloth that has been dipped in soda water or club soda. This will remove any leftover hairspray or other residue that might be on the surface.
Another option is to dampen the cloth with water and dish soap, then wipe everything down with it. The soap will help break up any grime while the moisture will help make sure everything dries quickly.
Microfiber Cloth
Clean your JBL Bluetooth Speaker’s controls and buttons with a microfiber cloth. This cloth is versatile and can be used to clean many other items in your house or office.
Lint-Free Cloth
If you need to clean the back of the speaker, use a lint-free cloth to avoid causing scratches on the surface.
Denatured Alcohol
You should also periodically wipe down the speaker using denatured alcohol so you can remove fingerprints or dirt that has transferred from other surfaces.
Cleaning the screen
If your JBL Bluetooth Speaker is just covered in fingerprints, it might be time to give the screen a wipe down.
To clean the screen on a JBL Bluetooth Speaker, use a soft cloth and a little bit of water.
Never use any chemicals or cleaners for this task because they can damage the screen and circuit board.
Cleaning Up Dust and Debris
The first thing to do when your speaker is dusty is to turn it off and unplug it. Remove the grille and use a can of compressed air, like Dyson’s Airblade, to remove any dust particles. Use a lint-free cloth or microfiber cloth and gently wipe down the speaker.
Keep in mind that your device will need charging periodically and if you live in an area with high levels of pollution you may need to clean your speaker more frequently than others.
Remember: If you leave dust and debris on your speaker for too long, it could lead to permanent damage.
Steps for Cleaning Up Dust and Debris
Cleaning your speaker is not only important for its aesthetic appeal. Dust and debris can collect on the device and cause it to malfunction over time. So, you should clean it every few weeks or when it starts to act up.
First, make sure that the JBL Bluetooth Speaker is turned off then unscrew the bottom of the unit from the base. Next, use a dry paper towel to remove any large pieces of debris that are stuck in between the speaker grille and frame. Be careful not to break the speaker grille as you remove small bits of dirt from between these two parts.
Once you have removed all of the dust, wipe down both surfaces with a damp cloth (water-based cleaning solution) and let it dry completely before replacing back on its base. Finally, run a cloth with distilled water through the speaker grill and frame to clean any remaining debris that may be stuck in there then replace it on its base.
How to clean the JBL boombox Bluetooth speaker
Your speaker is one of your most prized possessions. It’s worth doing whatever it takes to keep it in good condition, but if you’re not sure how then this post will be just what you need! Here are some tips that will help you maintain its pristine condition:
- Use a microfiber cloth to wipe the surfaces with a dry cloth and avoid anything abrasive like paper towels.
- Clean your device once per week or when needed with a damp cloth and mild soap solution.
- Do not use water or any other liquids near your speaker circuit as this can cause damage.
- If there is stubborn dirt on the surface, try using a wet towel and rubbing the area with short strokes in the direction of the grain. You can also use a toothbrush or nailbrush to gently scrub hard-to-reach spots on the surface.
How to clean JBL speaker Charge 3 and Charge 4
The JBL Bluetooth Speaker has a water-resistant design, but that doesn’t mean it’s maintenance-free. You can even use the Bluetooth speaker on a Boat.
Over time, dirt and dust can accumulate on the speaker grille and drivers. This can make your speaker sound worse.
Use a microfiber cloth to gently wipe the surface of the grille. Your fingers work well for this task as well.
If there are hard-to-reach areas like the inside of the speaker grill or inside the battery cover, use an old toothbrush or makeup brush to scrub away any dirt that’s accumulated there.
When cleaning both JBL Charge 3 and Charge 4 speakers, use cold water only! Hot water will fry the electronics inside these speakers.
You should also check out our cleaning video if you need visual instructions on how to clean your JBL Bluetooth Speaker:
How to clean JBL Flip 5 Bluetooth speaker
The JBL Flip 5 is one of the most popular Bluetooth speakers on the market. It’s small and durable and can be used as an outdoor Bluetooth speaker or indoors to keep you company for hours and hours.
This speaker is easy to find and purchase at any major retailer, but it can be hard to clean if you don’t know what you’re doing. If you want to keep your JBL flip 5 in pristine condition, here are some guidelines about how to clean your speaker:
- Turn off your device before cleaning. Make sure there is no music playing or power on the device.
- Use a damp cloth with warm water and dish soap. Use a microfiber cloth for best results.
- Lightly dip the damp cloth into a cup of warm water mixed with liquid dish detergent and ammonia (only use these two ingredients).
- Gently rub the damp cloth over the surface of the speaker to remove dirt and dust.
- Rinse with cool water if needed, then dry with a towel.
6) Do not put anything inside your JBL flip 5 that will cause damage, such as coins or keys.
How to clean a food base stain on a JBL speaker
These wireless speakers are a great way to broadcast your music from anywhere in your home, but they can be tough to clean. Thankfully, the JBL Bluetooth Speaker is not as easily ruined by food as other devices can be.
First, try wiping it down with a microfiber cloth. If that doesn’t work, you may have a tough food base stain.
For this type of stain try using a clean white cloth and dipping it in a cup of warm water with a teaspoon of liquid dish detergent and a teaspoon of ammonia.
Lightly blot the stain and let it sit for 15 minutes then lightly blot again. Do not rub it! Let it dry before trying again.
Conclusion
There are a lot of ways to clean your JBL Bluetooth speaker and keep it as good as new.
Luckily, we’ve compiled all the necessary information you’ll need to do so. For those looking to clean their JBL speaker from the outside, we recommend using a damp cloth.
That’ll be the easiest and most effective way to remove any dust, dirt, or debris that accumulates on the surface of your speaker.
Also, if you’re looking to clean your JBL speaker from the inside, washing with water, dish soap and a little bit of bleach will do the trick.
One important thing to note is that all speakers have different ports and inputs, which means they require different cleaning methods. With this in mind, it’s important to know exactly what type of speaker you have before cleaning it.
FAQs
What type of cloth can I use to clean my speaker?
The best cloth for cleaning your speaker is microfiber. Use a dry, lint-free cloth or paper towel to wipe down the surface of the speaker. If a stain remains, use a washcloth or rag dipped in liquid dish detergent and water and blot on the stain until it is removed.
Can I use harsh chemicals on my Bluetooth speaker?
No! It is not recommended that you use harsh chemicals on any device due to the risk of damaging them.
How often do you need to clean your speaker?
You should clean your JBL Bluetooth Speaker every day. This is the best way to keep it looking good and smelling fresh. This is just the wiping. Cleaning inside out should be done periodically since it mostly does not affect the performance of the speaker
How do I clean my JBL Bluetooth speakers buttons?
To clean your buttons, hold down one button while simultaneously pressing another until they are both released. A small amount of dust will come out. Next, use a dry cloth to wipe each button and then let them dry before using again.
How do I clean my JBL Bluetooth speaker?
If the speaker is dirty or you have spilled something on it, first remove the speaker from its packaging. After removing the speaker from its packaging, dip a soft, damp cloth in water and place it on the speaker. Use your fingers to gently rub away any dirt that may be stuck to the surface of the speaker. When you are done cleaning the surface of your speaker, use a dry cloth to finish drying off the surface.
2 thoughts on “The Ultimate Guide on How to Clean a JBL Bluetooth Speaker”
Comments are closed.